Euroimpianti designs and builds drying ovens which can be integrated into all our complete coating systems or in customised finishing cycles.
The ovens may be independent, namely, supplied with their own combustion chamber, or integrated into complete finishing cycles inside one single oven where the paint polymerisation takes place as well. This offer compact solutions and energy saving opportunities. In automatic cycles, a careful design can determine the correct size of the oven, and guarantee perfect drying of the products, in compliance with their features and with the production requirements.
The oven has forced hot air circulation and is equipped with an incorporated generator, in which the smoke circuit is fully separated from the heat exchange air. Therefore no combustion products are emitted into the environment. The oven is basically made of two chambers: the first one houses the heat exchanger which has free expansion/running capacity; the second is the passing and accumulation area for the pieces to be treated.
Particular care has been paid to the design and making of the external panels, in order to minimise heat loss to the outside, and to the combustion chamber, in order to maximise the thermal exchange contact time and obtain thus the maximum efficiency possible.
The winning characteristic of our ovens is their modularity, which makes it possible to highly reduce installation time, and gives large possibilities of expansion in case of future increase in the quantities or dimensions of the pieces to be treated. The electronic thermal regulation is guaranteed by an industrial probe tele-thermometer which directly acts on the burner. Besides, a safety device protects the exchanger against overheating in case of ventilation shortage.
The heat preservation during continuous automatic running, is guaranteed by the oven outlet and inlet air curtain systems which, thanks to their particular design, function also as vents of the water which accumulates after previous surface treatments. In case of automatic or manual lines, the heat is preserved by means of automatic or manual sliding doors/wings.